Pathhead School, Kirkcaldy Fife Scotland
We will have no hesitation in using or recommending your service in the future. I will be delighted if the data is can dispatched today.
THE RECOVERY ... The Evesham Silverstor XS 4x WD 800GB hard drives hdd had lost it's share folders after power system failure. The customer had attempted a raid rebuild which failed after about 10%. When Apex recover the data we do not attempt Raid rebuild - we first clone the drives to preserve the data then recover files in a read-only environment outside of the Evesham unit..
Raid Recovery Services...
Pathhead School, Kirkcaldy Fife Scotland
Bell Projects Limited, Welwyn Garden City Hertfordshire UK
Marvellous, thank you for all your have done. The client was very impressed with the speed and level of service - we will certainly be using you again!
THE RECOVERY ... The Buffalo Terastation TS-0.6TGL/R5 0.6GB RAID5 had suffered the error E21 chip failure Network Controller. This meant no shared folder or data access as the system would not boot up..
Acer Altos Easystore - 2TB (4x1TB) hard drives in Raid 5. Access to the system was not possible, ie web interface did not work and the shared folder and files could not open. Eventually I powered off and on, after which the unit just hangs. Acer NAS controller failure - unit lost from network after turned off. Model No. NS04-4110B-ACE with 4 Seagate 7200.11 ST31000340AS disks. Thanks for this - Your service is exemplary and very much appreciated - happily (not always what you want to hear) we rarely get failures but rest assured you will be our first port of call in any further cases of this kind..
Johnston Control Services Ltd, Horsham
I had a Linkstation LS 250GL by Buffalo where my Share folder had disappeared. The system still booted up and Link LED was on. It provided an IP address but the share folders did not show on the network places in Windows. Thanks a lot, much appreciated..
Publications Ltd, Watford, Hertfordshire
Netgear ReadyNAS NV+ (RND4410 / RND4000) disk 1 died - it contained 4x1tb HDDs with Netgear's X-RAID. We replaced the disk but the volume is refused to re-sync - can't access any of the data. Could access the drive, and view the web GUI, also saw the folder structures from a windows PC but it would not access the share and the front end said the share is offline or cannot be found. The device contained all the important documents and artwork - required 48 hour turn-around. Drives were Seagate ST1000528AS Sata. We received the drives back this morning, thank you so much for turning that around so quickly!.
HP Proliant DL385 Raid 5 6x 147GB HDD SCSI 2 failed disks running Citrix OS Operating System (Linux). Possibly a hotspare disk as well attached to scsi controller. Data Recovery required. The array consisted of 4 Fujitsu SCSI 10k rpm drives MAT3147NC with pcb no.CA21326-B42X Ultra 320, and 2 WorldDisk MXJ3147SC800600X. Both WorldDisks failed and remained totally silent when switched on, they did not spin up or boot when powered. The recovery was very good news..
Thecus N3200PRO 3 disk raid 5 - data recovery - simply was working then 1 hour later failed raid array. 3x Blue WD Caviar 320gb hdds. You may recall you recovered the data of a Thecus drive for us last year - you did a very good job. Thank you again..
Creative Ltd, Richmond, London
2x1TB Seagate Barracuda LP HDD from Iomega Ix2-200 Mirrored Array. Possibly corrupt Superblock. A large pdf photoshop file was being saved just prior to the corruption / damage to the NAS. Since then the Iomega device has booted up but not been able to see the drive data. Iomega have exhausted all options and not been able to access the data. The array is visible but volumes will not mount due to no secondary superblock and needing a clean structure for the raid. I want to say thank you so much for helping us out, I can maybe get a good nights sleep tonight knowing we can operate fully again. Many thanks from me and my team..
A INFORMÁTICOSG S.L. Madrid. SPAIN
4x 750GB Hard Disks from Easystore Altos. We had a RAID 5 with 4 hard drives. The RAID was working well, the discs are fine, can access the Home folder, but the rest only see the shared folders, but not their content. This happened after an unexpected power off. FalconStor filesystem. Thank you very much for your work, we are very happy..
VEK IT Consultants, Utrecht, Netherlands
Iomega STORECENTRE 150d 2TB NAS with 4x 750GB Seagate SATA Hard disks. Disk volume unreadable - the system NAS crashed after power outage. The unit did not start anymore but the disk status led blinks red/green. Main board defect, possibly header corrupt for the raid 5 configuration. The disk arrived this week, was busy so I\'m a bit late in the feedback. Have loaded the data on the new NAS. It looks fine. Thanks for your support..
DSI SCRL, Bruxelles, Belgium
FibreCat SX80-i iSCSI Raid 5 ESX VM-ware Virtual Machines - data recovery. 12x 750Gb Seagate Hard Drives ok - Raid Controller failed. System NAS crashed after unexpected power outage. 11 drives were in the raid array and disk 12 was Hot Spare. After the crash disks 2 6 and 10 were in Left Over state. Fujitsu engineer applied the Trust Command but the raid would not start. There were 4x 2TB LUN's each formatted with VMFS. The VMDK files were a mixture of Linux EXT and Windows NTFS virtual disks. Thank you also for recovering our data, we have a lot of users who were without services, including Belgian administrations. I will recommend your services....It was a pleasure to work with such an expert like you..
Shwlan Comms Ltd Cambridge, Cambridgeshire
Thecus i5500 iSCSI NAS 5x 1TB drives in Raid5 array, Disk 4 failed and was replaced 10 days ago, now disk 1 failed and says that d1 and d4 no longer part of raid. No data access as 2 disk are missing from the RAID 5. Thecus service engineers could not gain access to the unit remotely as the unit would not allow them to repair it. The unit provided iSCSI partitions formatted in Windows NTFS file system. Thank you - it is reassuring to see some familiar images again..
Technical Services, Oxford, Oxon
Acer Altos Easystore - stopped talking on network - drive lights appear ok. Data Recovery required from the 4x Seagate Barracuda 7200.11 500GB drives. System was setup as raid 5 and failed over the holiday. Could not find Public Directory. You have done a marvellous job. Well done..
Iomega Store Center Ix2 failed and I needed to recover the data stored on the device. The issue was that the device would not power on and a red light is flashing on the front. A friend has taken a look, possibly a mistake having read your site. I insisted no further action was taken as I believe the drives are configured in the RAID mode, and therefore I hope to get my data back! The device had 2x Seagate 500GB HDD in raid..... I've hooked the drive up to a USB caddy and I can see all data. Thank you for the service, it's good to have our data back..
Buffalo Linkstation Duo 1TB NAS drive failed to boot up when powered. It contained 2 off 500GB 3.5 inch Samsung SATA hard drives. The Linkstation was incorrectly switched off and now only enters Emergency Mode when switched on. Both hard drives inside it remained silent and would not spin up. Thanks for rescuing our files so quickly..
Buffalo Terastation HS-DHTGL/R5 with 4x Seagate 7200 250gb hard drives. The terastation would start to boot up then fail with System Error E04 - can't load kernel fault message. Obviously we could not access it via the network. The recovery was excellent news. Thank you very much..
Buffalo Terastation HD-H1.0TGL/R5 4x250gb WD2500 Western Digital Hard Drives. The Network connection appears to be broken - no activity from the Link/Act LED flashing. 1 disk had red status light and stopped syncing. Thanks for the speedy turn-around..
We had installed a netgear nas SC101 but had problems with one 200 MB hard drive. The Netgear SC101 has 2 Maxtor DiamondMax hdd in separate use with separate drives (not use as a mirror to system). The Disk spins
and is recognised by the Netgear software. The Netgear Smart Wizard shows the drive as available, but there is
no way to attach the drives of one of the hard disks, so there must be something broken. The other Hard Disk is still available and all partitions / drives are attachable and reachable. The failure happened after firmware update, after this step, we could only reach the one of both hard drives. Thank you for your help, have a wonderful weekend..
IDPartnership, Glasgow, Scotland
WD MyBook World Edition (blue ring leds) NAS - broken mirror raid 1 array.- WD7500AAKS 750gb drives x2. Possible attempt by raid controller to rebuild the array. One drive failed. The other does not show any files or folders when connected to the computer. we can confirm that we are in safe receipt of the drive. Not only that but we have now added it to a workstation (our server is SCSI, no SATA), with drives mapped to it, so we're back online. I see the folder structure appears to have been retained, which is a bonus. Your assistance is appreciated..
Sanderson Ltd, Sheffield
Buffalo Terastation Data Recovery 2TB (4x500GB Hard drives) Initial Error displayed was System Stopped. After a re-boot it displayed Can't Mount Raid Array E14 error message. Finally it reported I12 degraded mode. I have received the data disk an am already transferring the data. Thank you very much for all your help..
iRespons Ltd, Glasgow
Buffalo DriveStation Quattro with Drive 3 failed and Raid card faulty. The array appeared to be turned off, no fan, no LEDs, unit dead. The recovery is really good news. Thanks for all your help with this...
Sogipers srl, San Benedetto Del Tronto, ITALY
Acer Altos Easystore NAS drives. There were 2 Easystore raids each with 4 Seagate 500GB Hard Drives. No longer gave access to disks.
Without disks inserted, the unit restarts and can access on the web interface. Inserting disks into it gave no access. Powered off by front button, after reboot both NAS are unreachable over the LAN network, i LED blinks and all disk lights are green. Without disks the NAS gets default parameters and works fine. We have reset it by pressing the button but no effect. I've just checked the files in the external drive and i confirm that your work has been perfect. Thanks..
Dell PowerEdge 2850 PERC 4DI Raid5 SCSI Data Recovery. The Raid array consisted of 4 146GB SCSI SCA-80 U320 connected drives. The disks were fine but they have corrupted RAID database information from a faulty RAID controller, which has run in degraded mode. The drives were Maxtor Atlas 10k Ultra320, Seagate Cheetah 10k.7 ST3146707LC, and Cheetah 15K.5 ST3146855LC. That's a huge relief for us as it will save us a couple of months redeveloping a lot of web forms.
Thanks for looking at this so quickly..
Terastation failed to start from power failure just booting into "Loading Kernel". After several attempts to restart it went to EM mode and could not be recovered. Buffalo suggested firmware update, it did re-boot it then power-cycled again but would not re-start. Terastation could be seen by NAS Navigator, on PC but not in File Browser or firmware update utility. Now displays RAID failure, HD1 faulty. No file/folder Shares are visible. Buffalo Teratstation Raid E13 error in array D12 running degrade mode drive 1 fail - not visible on network - data recovery. 4x500GB Samsung HD501LJ hard drives. Thank you very much - got all the disks and data back now - we shall pass on your details to others who may be in need..
Buffalo NAS - Linkstation Quad LS Q4 0TL/R5 4x 1TB Samsung hard disk drives. Correspondence with Buffalo Tech suggests that the motherboard has failed. Needed to recover the photographs and video from the unit. Just to confirm safe receipt of your package and that I can view the files on the new hard drive. Thanks for your help..
Freecom 1TB Data Tank started making a hissing noise and required data recovery. The tank consisted of 2x Samsung hard disk drives in mirrored Raid1 configuration giving 500GB of disk space. Data transferred to 2TB Verbatim esata / firewire hdd. Many thanks and excellent news on the recovery!.
Worthing, West Sussex
Buffalo Terastation lost RAID 5 (4 x 500GB Hard Disk Drives) after a Power cut while the NAS box was online. 2 disks were showing as faulty so Data Recovery from the share folders was required. Thanks again for all your help..
Terastation Raid5 Data Recovery - Disk2 failed. Then took it out on advice from Buffalo but could not get the data as Raid had failed. They suggested it needed professional data recovery service. I have had the disk today. Thanks once again for the speedy turn around.
Seagate Sata Hard drives from Iomega StorCenter Pro 150d 1T network hard disk, we had a problem in shared folder, the Network Access Denied on shared folder on Iomega StorCente, it seem that lost windows share folders. We could access to the Iomega StorCenter and see all the setting for it, and when click on disk management we saw the capacity properties (how many GB used and how many GB free), we saw all options, but not access the share folder and see our data. Thank you so much for help and cooperation..
Lacie Ethernet RAID model INNS04-4200-LAC. Raid Controller failed and unable to access data. The system warning light continually flashes and the unit would not shut down using the power button. Great news on the recovery. Many Thanks for your prompt service..
Independent Business Park, East Grinstead, Sussex
Buffalo Terastation with RAID5 array on 4x 250GB IDE hard drives. The setup console/web screen claimed 2 drives in the RAID 5 array have failed. I'm now as happy as can be, and have been able to restore all the affected files from this backup. Thanks again for your help with this. Its great to have been able to restore the images we would otherwise have lost..
Hypersys O.E., Attica, GREECE.
Intel NAS contained 500GB seagate SATA Hard Drives with RAID-5 configuration. The problem was caused by an unexpected power failure. On system boot, the web configuration console requested the disks to be initialized and their status is now New instead of RAID5 array. The initialization phase has not been kicked off, as this would probably have deleted all the data that is already there. Once again thank you for the recovery. Hopefully I will not need anymore..
NetSolution Limited, Nottingham
After a power outage on the Fujitsu Siemens Fibrecat SX80i the Virtual File System disappeared. The system consisted of 2x 2TB drives VMFS configured as Raid0 stripe used with ESX iSCSI. Apex was the first company we talked to that could recover Virtual Filesystems. Package arrived onsite at 10:15, and is all up and running now! Once again you have performed miracles, thank you. I hope you don't take this the wrong way but I hope it is a few more years down the line before we need to do business with you again..
Lacie NAS Ed mini (Ethernet Disk) with Samsung HD320KJ 320GB hard dribe EDmini V2. It powers up but just sticks with a blue blinking light. disk is spinning and it appears to be clicking in sync with the flashing blue light. we had a power failure overnight.Many thanks for your prompt and professional service..
Terastation HS-DHTGL went into emergency mode. No disk array was being registered in the control console. We had attempted to re-load firmware. Error code E04 unable to load kernel. The recovery is good news thank you..
Brecht, nr. Antwerpen, BELGIUM
External Network Storage System (NAS200 Linksys / Cisco) containing 1 Western Digital SATA II HD 400GB (WD RE2 WD4000YS). During a file transfer, the connection with my NAS200 system suddenly got interrupted. From that moment on the NAS200 system asked for a user/password whenever I tried to connect to the external drive.As I had never configured a password, the login always fails (even with admin/admin). After resetting the NAS200 I could connect again to the NAS200 using the IP address and a browser.The NAS200 indicates that a drive is available with zero, 0GB Disk Space and zero, 0GB Free Space.
I could no longer access my files, so, I guessed I have a corrupted hard disk. ..The hard drives have arrived.
I just connected my laptop to the new hdd and it seems that I can access all files ;-) Many thankx for your support and recovery. It was a pleasure to work with you..
I had a Buffalo Raid5 3tb Terastation Live with 4 disks. It worked fine except cannot access old shares directories. New shares can be added/accessed OK but since the drive filled up the shares created before this are now inaccessible. Possibly shares went corrupt while deleting files. A message suggests "You might not have permission to use this network resource contact the administator of this server to find out if you have access permissions" and "The network path was not found". The nas navigator could see the terastation but folder is not accessible. Fantastic news on the recovery!.
Kingston Ltd, Hull, Yorkshire
Seagate 36gb SCSI hard disk drives were in a RAID5 array on a Windows NT machine controlled by Adaptec dpt i2o (dpti2o) raid controller. The system was showing - one and then two drives missing from raid 5 array and required data recovery. Many thanks for your help on this job..
The AIX IBM 6150 Tape Data Cartridge held backup of unix files (AIX - cpio) in 1994. I no longer had the tape drive unit to read the QIC cassette anymore. I just received the mail this morning. All files readable, perfect. Thanks again and have a nice day..
The Research Institute, Cambridge
I had a Buffalo Linkstation HS-DHGL-500 NAS that has the error sound then flashing red light (flashes 6 times).
meaning that it no longer recognises the hard drive. It made a siren like sound e.g. a low tone followed by a higher tone. Network share unavailable - no access to disk. The linkstation remained totally silent with flashing red led. 3 flashes - Partition problem with hard drive. I did not Reformat the hard drive as I did not want to loose the files. I’ve now received the data. Thanks again..
There were 9x 300GB SAS disk drives from RAID 6 HP MSA2324fc G2. 3 disks in the RAID6 ADG Array failed and the MSA put the vdisk (virtual disk ) offline. Smart warnings were shown on the console and the disks brought back online using the Trust command. The RAID appeared online and rebuilt using a hot spare - one volme was available on VMWARE hosts but others were not. 3 drives marked as LEFTOVR (leftover). Needed to recover vmdk file representing a drive from a vmware virtual machine. All the vdisks were vmware vmfs format.Thank you very much (for the recovery work), that is great news..
The files were stored on DC6150 QIC-150 6" Tape using a UNIX system with TAR backup software. The files needed to be transferred from the tapes as the original tape drives were no longer available. Thanks for your hard work.
Buffalo Terastation Pro, 4x Internal Samasung SATA hard drives. At least one disk has an error and RAID rebuild has not been successful. Various messages have flashed up including I18, E13, E14, E23. The data appears to be accessible, but any attempt to copy large amounts of files fails after a period of time. The recovery is great news. Thanks again.
There was a Dell Perc SCSI Raid Server containing 5xQuantum 18GB hard disk drives in a RAID5 configuration. One day the Raid failed and some hard drives were showing offline in the configuration screen so data recovery was required. Previous Raid rebuild attempts had failed. Thanks - this job was a huge relief for us..
Recover from 2x500gb MDADM RAID1 Striped disks Ext3 - not reformatted - no partition shown after Ubuntu install (was Fedora) on IDE boot drive. 2nd pair hdd were reformatted Ext3. Thanks for looking at this. Recovery Disk received, thanks. I’ve successfully mounted it..
St Andrews, Guernsey
Altos Easystore 2TB, 4 x 500Gb in Raid 5. We could not browse data from network, error log showed active directory not synced. Powered unit off from within the console software, when it switched back on it did not appear on network.Pressed the reset button (oops) unit now appears on network but will not use preset IP, replies on DHCP.
Could not access console software, unless unit is powered up without the drives installed, if they are plugged in then it powers up at the same IP but cannot access data or console screen.
Unit gave no indication of hdd or raid errors. This is the second one we have had problems with, the 1st constantly came up with a disk change screen, had to reformat it. I have just noticed your email from last night (do you ever go home?). Great news (on the recovery), thanks..
The Sagitta raid system failed due to power supply / raid card failure. Thanks for the recovery. That's good news - thought it'd be wrapped in red tape for at least a month!! Would it be fine to come and collect the drive tomorrow morning? Thanks for the fantastic service!.
E21 Error - Buffalo TeraStation Pro data recovery. I am super pleased to say that everything has arrived and I have already connected the WD drive up and am currently going through the data and it looks really good so far. I would definitely be very happy to provide yet another positive recommendation to go alongside the already long list on your website. Many thanks.
Kingston Upon Thames, Surrey
SS4000E no longer recognize the disk raid after a power failure. It was impossible to access data in the disks. Very good news (on the recovery)! Drives arrived this morning, thank you..
This job consisted of 8 x 320GB Sata RAID Hard Drives on 2 x 4 port SAS multi-lane ports. The controller was HighPoint Rocket-Raid 2322 (RAID 0, 1, 5, 10, 50 and JBOD) with Dual External Mini-SAS Connectors to Array enclosure. Highpoint advised the raid aray is corrupt and two sets raids are visible in the configuration screens whereas there should be one single 2TB raid. Log reports Disk Failed. Plugging Device detected. (’ST3320620AS’ at controller1-channel1) Status Disabled / Maintenance. The box has arrived intact, thank you for your work..
ALLNET ALL-6400 RAID 5 with x 400 GB Seagate Barracuda 7200.8 drives (Rebadged Thecus 4100). Fan failed causing it to overheat which triggered raid failure. Replaced fan unit okay. Raid 5 needs recovering as it was not showing although we can log in. Thanks for all your help with this (recovery). All the best.
Harbour Estates, Chelsea, London
After power cut the RAID was broken leaving the system status led = yellow and the global disk status led = yellow blinking. No access to any shared folder and back up data. Many thanks for the recovery. This is a good way to begin the week !!!! Thank you very much for the very professional treatment..
Manchester Metropolitan University (MMU), Cheshire
We had 4 SCSI Drives - 3 Raid5 + Hot Spare connected to an Intel GC80303 SL57T SRCZCR SRC series RAID Controller. We had previously approached another company which failed to recover the data. Thanks again for your support..
iSCSI Buffalo Terastation Rack Mounted TS-RI4.0TGL/RR-EU serial 4584308490031. RAID 5 2x LUNs with NTFS and VMFS partitions. Drive 3 had an error, the unit tried to rebuild but got in a loop of rebuild. Buffalo support said take the drive out, format it and put it back in to see if it would rebuild. Unfortunately it then thought the drive was ok but showed an error on the Raid and would not offer a rebuild option.Just to say a big THANK YOU for all your help in getting the data back for me. I have (just!) now got all the VMs transferred back over and up and running..
Solaris often used ufsdump and ufsrestore to archive data files to tape, but the Exabyte Tape drive is no longer made. Many thanks for the recovery, glad there were no problems.
Iomega Nas P435m 320GB Network Storage that freezes when booting up.we removed the 4 raid 5 drives and fitted them into a pc to see the raid status and the drives all say failed. Raid 5 consisted of 4 x 80gb Hitachi hdd. Thanks for having recovered my files..
Buffalo Terastation with red light is flashing 5 times - computers cannot connect to it over the network. Thanks for your speedy an professional service.
5x146GB SCSI Hard Drives from Dell Power-Edge Server PERC 4. 3 of 5 disks had gone down and were reported as not recognised in the RAID-5. Just to let you know that files now restored so Server Data back on our server and all now seems back to where we were before the server crashed. Can I thank you personally for all you hard work to get us back up & running again. Many thanks.
Recovery of missing Western Digital NetCenter 500Gb shared folder was missing - the configuration screen is still visible but the files were not. The reason for the failure seems to be that I inadvertently filled up the drive completely. I received the recovery drive in the post this morning and the files seem to be there. Thank you..
The Terastation showed a raid error which needed files recovering. I wanted to place on record how very impressed I have been with your data recovery service. As you are well aware, these incidents when they occur, are quite harrowing. The files which you recovered represent several year’s photographs taken by our Publicity Department.
I was impressed with:
. The way in which you kept me informed at every stage
. The speed at which you responded
. Your professionalism
And most of all, that you managed to recover the data! You will see that I have copied this reply to a contact at Livingstone Solutions. These are a small firm of IT consultants who have helped me with various IT issues. I told them of my data problem and they were interested to know our experience of dealing with your company.On the basis of this incident I can thoroughly recommend your services to anyone.
West Melborne, Palm Bay, Florida USA.
The Snazio TeraNAS / Infrant Readynas 600 was configured using the Raidiator X-Raid. OS crash or hardware failure left flashing blue light but not raid not booting up or not visible on network. Thanks for an excellent service. Certainly something we will recommend to others in a similar unfortunate position!.
CarocLtd, London W9
Buffalo Terastation HD-H0.6GL/R5. The dial red light LED blinks and was flashing 5 times. Computers could not connect to it over the network so no access to data was possible. The unit included 4 x 160GB WD hard disk drives. Data was recovered to a Windows USB Hard Disk. Thanks for your speedy an professional service..
After upgrading the firmware on our SC101 the data was no longer seen on the network drive. When looking at the console it appeared the data partition had been deleted. Just to confirm parcel has just arrived. Thank you very much. I will definitely give a reference to all people I know..
Buffalo Terastation Pro containing 4 hard drives in RAID5. One disk failed and a Raid array rebuild was attempted. No access to shares and not mounting the Raid array. Terastation LED lights flashed red, beeped and gave error E13. Via web console one hard disk was showing as "not connected". Thanks I have just put this recovery disk in my computer. Nearly all the photos seem to be there, which is a great relief, and my backups. Thanks again.
PSU Technology Ltd, Cheltenham, Gloucestershire
The Buffalo Terastation would not boot up one morning. The display showed a disk error. The files and data were recovered to a Windows NTFS drive. Thanks, I have received the hard drive..
HomePlay, Wokingham, Berkshire
The Buffalo Terastation data would not boot up and displayed E21 error. Marvelous, thank you for all you've done. The client was very impressed with the speed and level of service we will certainly be using you again!.
The Redhat Linux 9 Raid-1 Mirror array consisted of 2x 73GB SCSI Drives with ext3 filesystem. Unexpected / sudden failure of the Power supply caused one disk not to be recognised. The scsi controller error message was "ASYN start unit request failed". Data hard drive was delivered before 9am - I have plugged drive into a PC and it works a treat..
QNAP 409 pro. Problem when migrating from Mirror RAID 1 to 4 Disk RAID 5. The NAS reported one disk as ’invalid’, which was removed half way through the migration. The migration got to about 50% . After removal of HDD4 the NAS reported it was ’rebuilding 1%’ but no further progress. Qnap support then said that the volume data had gone so I contacted Apex for re-build. Thanks for that, I’ll arrange payment today. Looks like all the data. Cheers..
The Intel SS4000E INNS04-4200 incorporated 2 x 1TB Western Digital WD1000FYPS sata hard disk drives in RAID1 mirrored configuration. The NAS Drive Share Folders were not accessible from LAN Network - it appeared to be a hardware problem within the drives. The data was recovered to a new Windows compatible hard disk. Package has been received and data restored. Thank you for your assistance..
2x 73GB SCSI Drives with SCA connectors that were a mirrored RAID 1 array. The OS was RedHat Linux 9, using ext3 filesystem. Power supply failure caused one disk not to be recognised with scsi controller reporting "ASYN start unit request failed". Parcel was delivered before 9am - I have plugged drive into a PC and it works a treat..
Intel SS4000-E configured as RAID 10 containing data that requires repair. 4x500GB Seagate SATA hard drives. The NAS was working one day then failed to boot up the next day. Everything is now perfect. The data has arrived and been restored to a new location here. Your performance was outstanding. I really appreciate everything you did for us..
Buffalo Terastation Lost RAID-5 data access HS-DHTGL/R5 4x250gb Samsung sata hdd - Error was unable to load kernel fault. Recovered data successfully. Great.
Wassen Ltd, Surrey
The IBM eServer xSeries consisted of 3 x 73,4GB SCSI hard drives in RAID5. The Raid controller indicated 2 out of 3 HDD were logged offline. The array had crashed. Hard disks were shipped to Apex. Awesome news on the recovery! We will initiate the payment process today. It was great doing business with you. Thanks.
The Linux LVM-2 RAID-5 array was lost after sudden electricity power cut failure. Thanks for a superb service. We’ve pretty much got things back to normal here. We appear to have lost nothing at all!.
PWAdamson Ltd, Aberdeen
Buffalo Linkstation RAID 2x1TB hdd Hitachi - sounds to boot normally but no access to data was available or shown on network. Thanks the recovery is great news..
University of Regina, CANADA.
Buffalo terastation RAID5 failure 4 x 400gb drives, Buffalo technical support advised that the array on a TS-1.6 TGL / R5 has failed. The 4 red LED lights were shining and there was no data access to share folders. Thanks for confirming that you have been able to recover the data. I will arrange payment tomorrow. I will see what we can arrange by way of delivery of a new drive to accommodate the saved data..
St Joseph’s Catholic School, Staffordshire
Thanks for your hard work with the recovery - that last data dump you did for us had everything on it we needed! 3x73GB SCSI RAID 5 Netware Server..
The reality of my situation was pretty grim with having the drive "Crash" but also not being visible in the BIOS, as well as being the primary drive in a RAID-0 stripped array - I really thought my chips were up! I think my situation had to be one of the worst you could get, and I still have my data at the end of it. All my data files have been recovered and precious irreplaceable files have also been recovered.
I just wanted to thank you for your help and because of the nature of my work I often get people asking me for PC advise - If anyone ever has a hard drive crash there is only one place I’ll be sending them.
Carter Synergy, Birmingham
Buffalo Terastation Pro (4x 250gb hard disk drives). One disk failed and a rebuild was attempted for RAID-5. The unit was not allowing access to shares and not allow to mount raid the Raid array. Terastation LED lights flashed red, beeped and gave error E13. On the web interface disk 2 was showing as "not connected". Thanks I’ve received the package, just put this recovery disk in the computer. Nearly all the photos seem to be there, which is a great relief, and my backups. Thanks again.
Newcastle upon Tyne, UK
1TB Buffalo Terastation 4 x 250gb Samsung hdd - deleted share folders then formatted the terastation. First of all I would like to thank you for all the hard work and speed in the matter. I must confess, keeping people updated is a very good quality..
Greenfrog Computing, Chesterfield
The computer system had 2 200gb Maxtor SATA hard drives configured as RAID-0 on asus P4C800-E. The Raid array was not recognised on one of the hdd disks. Thank you - I know where to come in future..
Buffalo linkstation 500gb Sata disk - drive failed to start. We have made an immediate payment, and will pick the new buffalo up on Saturday. Cool! Thank you..
County Durham NHS PCT
Dell PERC 3x 73.6GB Raid Maxtor Atlas SCSI hard disks. One disk failed in Raid array. Someone had also attempted raid rebuild or boot up from emergency disk. Thank you for the recovery..
IT HealthCheck Ltd, Dukinfield. Cheshire
Buffalo Terastation Pro TS-H2.0TGL/R5 Chip Error E21. Ethernet failure after power cycle. There was no way to access the Buffalo unit. That’s good. Thanks for all your efforts..
Offshore Handling Services Ltd, Morley, Leeds
The external drive arrived safely today, thank you. I am delighted to say that everything on it appears to be in order. Many thanks for your prompt and efficient service. I shall recommend your company should any of my colleagues find themselves in a similar predicament to mine!.
Teeside Music Alliance
Linkstation lost IP address, no data access, not on visible network. Thanks for doing this job so quickly!.
Milton Keynes, Bucks, UK
My apologies for not replying yesterday, the parcel of disc drives arrived safe and sound. I have forwarded the parcel onto Holland. Thank you again for all your hard work!.
Wednesfield Staffordshire, West Midlands
SC101 lost data partition which stored vital files for our business. I just wanted to convey my thanks for your hard work recovering this important data for us during the holiday period. We have now resumed normal operation. Feel free to contact me if you want a testimonial for your service..
Phitek Systems, Auckland, NEW ZEALAND
RAID corrupt, could not access to the unit with web browser. LAN clients could only read data on NAS, could not access with administrator id and password. Could not access unit with web browser. Raid definition corrupted but the unit leds were all green. This morning I will pay your fantastic work. Many thanks for the recovery..
Thecus N4100 (4x 1TB RAID) and an Iomega 2x1TB RAID). There was a powercut and I lost a load of files from the Iomega and all the directory folders from the Thecus. Many thanks - I've posted a link to your company on a professional Photography forum I use. Told them what a damn good egg you are, and how you make disasters redeemable...Thanks again.
FIPRA International, Brussels BELGIUM
Our Acer Altos Easystore failed to resond on the network. We had data on it that we needed to recover. The 4 hard disk lights are all green. The unit has approximately 847 gb of data on the raid set, but we could not see the files and folders. Thank you for recovering our data..
ABACUS Informatica S.r.l., Macerata , ITALY
Buffalo HS-DHGL HS-DH500GL NAS 500GB. Red lights started flashing on NAS and beeping sounds. Network share unavailable - no access to disk. Flash codes for Linkstation was audible beep low tone followed by a higher tone followed by 6 flashes. The linkstation remained totally silent with flashing red led. I've now received the data. Thanks again..
NHS Perioperative Management System, Sheffield Yorkshire UK
The Lacie Ethernet drive disappeared from the network and then was unable to power down without being turned off at the mains. I had upgraded the firmware a few weeks ago. Afterwards it was no longer able to access the data. Thank you so much for your efforts - I picked up the disk today from work and everything is great.
Thanks again for all your help..
Headteacher, Pathhead School, Kirkcaldy Fife Scotland
Evesham Silverstor XS 4x WD 800GB hard drives hdd - lost share folders after raid rebuild / power system failure Thanks. We will have no hesitation in using or recommending your service in the future. I will be delighted if the data is can dispatched today..
Raid Recovery problems that we recover data from are listed below.
Data Recovery, File Transfer, Data Transfer, File Recovery.
Data Recovery File Transfer for NAS RAID Hard Drives.